Apple Watch Series 5 (40 mm) Screen Replacement

A screen replacement for the Apple Watch Series 5 (40 mm) costs 15,000 RSD (Genuine Apple Part). The price includes the part and installation.

Usually 1-3 days. Call before coming in so we can check whether the part for the Apple Watch Series 5 (40 mm) is in stock. This lets you drop off and collect the device without waiting for the part.

The whole screen. On the Apple Watch Series 5 (40 mm) the glass, touch layer and display are fused into one part at the factory, so they are replaced together. That is why the price covers the whole screen assembly, not just the glass.

For a while, yes, but we don't recommend waiting long. The Apple Watch Series 5 (40 mm) has an OLED screen, and impact damage can spread over time: lines or dark spots can appear and grow, and the screen may start registering touches on its own. Dust and moisture can also enter through the cracks.

After replacing the screen, we close the Apple Watch Series 5 (40 mm) and seal it with a suitable adhesive to restore protection against water and moisture as far as possible. Because the device has been opened, we cannot guarantee the same level of water resistance it had when new, when it was assembled by machine and tested at the factory under controlled conditions. After a screen replacement, we therefore recommend avoiding water exposure, submersion and swimming with the device.

6 months for every screen option. The warranty covers defects or failure of the installed screen. It does not cover damage caused after the repair by impacts, drops or liquid exposure. This applies to all screen layers: if the glass remains intact after an impact but spots or lines appear, that is also impact damage.